Is your sump pump going off? Are you dealing with a basement or crawl space flooding even after following all the metrics? That means your sump pump alarm has malfunctioned and needs some attention.
You might have noticed that moisture starts locking onto the basement walls, especially in the rainy season. That’s why almost every modern homeowner now prefers sump pump installation to avoid such problems or flooding.
Sump pumps prevent moisture from escaping into the basement by pumping out the extra water using a motorized procedure. The good news is that new-age sump pump alarms can be easily connected to your smartphones via Wi-Fi. Plus, the consumer can immediately turn on a backup pump when the sump pump fails
However, sump pumps can also malfunction or have other problems at times. If you’re having a tough time with your sump pump, chances are other people have had similar problems. Read on to discover more about your sump pump.
Don’t know how to act when the sump pump alarm is going off? Let us tell you there is still some time to act and prevent the disaster. All you need to do is to be attentive and act quickly to come out of this situation. Read this article to know in detail about your sump pump!
How to respond to a Sump Pump Water Alarm?
The pump alarm can go off if the water level exceeds the set level ( i.e. about 5 to 6 inches 12 to 15 centimeters) in the sump pit or basement. To warn the user, a sensor (pre-built in the sump pump) is set at a specific level that triggers the alarm when the water level rises. Thus giving the user the ability to take action on time and prevent the crawl space and basement from flooding.
To avoid damage, make sure to check your sump pump at regular intervals. In case of a power cut, you can use the torch of your mobile phone or flashlight to investigate the matter and immediately switch to a backup pump.
Experts Tip: “Sump Pump alarm starts sounding immediately after sensing water. In case the water alarm is wet or underwater for more than 24-72 hours; you may need to dry out the alarm, replace or repair it for further use. Keep in mind to enable the alarm again after fixing the problem.”
How to Check If The Pump Is Running?
A sump pump can stop pumping or not work properly due to various reasons. Sometimes, you can simply reset your sump pump to make it work effectively.
If your sump is already running, then it’s better to let the sump pump do its job. Many people follow this trick to remove & dry the sensor, and won’t put it back until the excess water has been discharged. No doubt it works most of the time. But make sure what you are up to and know what you are doing, or you’ll end up damaging the sump pump. Now follow the step-by-step procedure!
#1. Check the Basin Water Level:
Many people get worried when it has been raining for the whole day and assume that the water level has crossed a specific level. If there is a little amount of water in the sump pump basin, and the sump pump is still working then there is nothing to worry about. But somehow if there is too much water, you need to figure out the issue. Check whether the sump pump or drain lines have been clogged.
#2. Alarm Won’t Beep:
You need to understand the fact that some sump pumps are not large enough to accommodate high levels of water. So there are better chances that the sump pump water alarm can stop beeping often.
Different sizes of sump pumps are available in the market. If you live in an area with changing water levels and extreme weather conditions, then make sure to buy a large and premium-quality sump pump.
We recommend you not ignore the problem as the wet basement can lead to black mold problems.
#3. Sump Pump Beeping Noises
If your sump pump is making unexpected beeping noises, it indicates the alarm is about to trigger and the pump will soon be activated. So what do you need to do?
First of all figure out the reason, sometimes even weak batteries lead to such noises.
Now check if the water level in the sump pump pit has exceeded the specific set level.
Most of the sump pumps these days come up with high-quality alarms, they won’t damage quickly. So you need to check the sump pump immediately if the alarm rings continuously.
You can even buy sump pumps that are capable of sending alerts via text messages on your smartphone when either a power outage or flood is detected.
#4. Your Backup Sump Pump Is Operating
Do you have a battery Backup sump pump? It’s a good thing as they can easily handle the flooding problem for about 4 to 5 hours in case of a power outage. Sump pump alarms may start beeping as the secondary sump pump starts working immediately when:
- Float switch fails
- power outage due to seasonal storms.
- primary sump pump fails
Battery backup sump pumps are capable enough to prevent catastrophic flooding in your basement.
#5. Don’t Unplug Your Pump
Even if the sump pump alarm goes off, do not unplug your sump pump. When the alarm beeps it indicates that the sump pump is unable to handle the high water level. Instantly unplugging the sump pump can create:
- Some severe water damage in your basement area
- Weaken the foundation
- Promote the mold growth on basement walls & wood beams.
#6. Basement Watchdog Alarm Won’t Stop
What if your Basement Watchdog battery alarm doesn’t stop beeping? FYI, it doesn’t indicate pump failure or risk of a flood; your sump pump system is perfectly fine.
Simply check if the power plug or batteries are overheating or have frozen in the cold weather. Other causes include
- Low or corrupted Battery
- Low battery fluid
- Loose power cables.
- Failed Fuse or Power outlet
How do I Reset & Turn Off the Sump Pump Alarm?
Almost all the sump pump models have a separate reset & alarm switch. You can easily enable or disable using the interface. Make sure to not disable the alarm permanently to avoid the water damage risks.
Can I remove the Sump Pump Alarm?
Yes, in high water level conditions, you can unplug and remove the sump pump water alarm for a short duration. Keep it aside, allow it to dry, and now replace the water alarm.
Need some professional help?
You can always seek professional help if your sump pump is unable to handle the high water level and absorb moisture. They can find out the best and most cost-effective solution or repair for a specific part if possible.
Don’t worry! It’ll cost you comparatively less than the irreversible property damage and health risks. We strictly advise our users to not ignore the moisture issues for a longer period. If you found this article helpful, do share your feedback in the comment section below!