Spring is finally here, and with it comes the dreaded prospect of water backing up in your sump pump. Before you know it, your basement will be flooded and all your precious belongings will be ruined. So how do you make sure your sump pump is ready for spring? Read on for tips on how to prevent water from backing up into your pump, and get ready for a worry-free spring!
Tips To Make Your Sump Pump Ready for Spring
Remove Any Debris
One of the first things you should do to prepare for spring is to clean your sump pump. This will help ensure that your pump is ready when the weather starts to change and water starts to flow more freely from the ground. Here are a few tips on how to clean your sump pump:
- Empty and clean the sump basin regularly. This will help prevent debris from building up and causing your pump to malfunction.
- Remove any objects that may be blocking the drain orifice. This includes leaves, branches, rocks, and other debris.
- Clean the pump motor and impeller with a non-permanent solvent such as acetone or methylene chloride. These solvents will not damage the motor or impeller, but they will eliminate any build-up of grease or sediment.
Test Out the Float Switch
First, check the float switch by flipping it open and closed. If it works properly, the pump should start when the water level falls below the switch, and stop when the water level rises above the switch. If the switch is not working properly, you’ll need to replace it.
Inspect the Check Valve
If your sump pump has a check valve, it needs to be inspected for proper function. A clogged check valve will prevent water from flowing out of the sump pump and can lead to failure. If you notice any debris or corrosion on the valve, it needs to be cleaned or replaced.
To inspect the check valve, turn off the power to the pump and open the discharge pipe. If the valve is clogged, debris will block the flow of water. If the valve is clear, it needs to be lubricated or replaced.
Clean the Inlet Screen
If your home has a sump pump, it’s important to keep it in good working order during the spring season. One way to do this is to clean the inlet screen on the pump. This helps ensure that water doesn’t get trapped inside the pump and causes issues. Here’s how to do it:
- Turn off the power to your sump pump by unplugging the electrical cord from the wall outlet.
- Remove the cover on the bottom of the sump pump using a screwdriver or a tool that comes with your sump pump.
- Inspect the inlet screen for clogs or debris. If there is any debris, use a plunger or a vacuum cleaner to suction it up and remove it from the screen.
- Wash and dry the screen before reinstalling the cover on the bottom of the sump pump.
Check the Power
If your sump pump is powered by electricity, make sure the power is on before you start using it. If the power is off, turn it on and test it to be sure it works. If the pump isn’t working because the power is out, call a contractor or an electrician to fix it.
If your sump pump is powered by gas, make sure the line from your house to the meter is firmly attached. If it’s not, a gas company can come and reconnect it for you. If your gas line has been disconnected, call a contractor or an electrician to fix it.
Also, check to see if any of the drainage pipes in your yard are blocked. If they are, call a contractor or an electrician to unblock them. Blocked pipes can cause your pump to malfunction.
Know the Signs Your Sump Pump is Ready to be Replaced
When it comes to your home’s safety, you can’t afford to ignore your sump pump. The thing is, many people treat their sump pump like it’s not important at all. But you need to remember that your sump pump is one of the most important pieces of equipment in your home.
Here are some of the signs that your sump pump may need to be replaced:
- Your water level has decreased significantly over a period of time. This could be a sign that your sump pump is not working as effectively as it used to and may need to be replaced.
- You have started seeing water coming up from the ground instead of going down into the sump pit. This could mean that your sump pump is not able to move the water any further and may need to be replaced.
- There are cracks or holes in the bottom of the sump pit. This could indicate that there is something wrong with your sump pump mechanism and it may need to be replaced.
If you notice any of these signs, it’s important to take action before something bad.
Springtime is coming! That means heavier rains and potential flooding, so it’s important to make sure your sump pump is ready for the season. Here are a few tips on how to check if your pump is in good working order:
- Check the suction power by plugging in an extension cord and seeing if the pump comes on
- Test the motor by turning it on and off multiple times
- Compare the output readings from two separate sensors